Elevator car top Board Blt GPCS1116 Elevator car roof communication board parts

The car top station is a control panel that sits directly above the elevator cab and enables the car to be removed from normal service. Elevator technicians use this panel to make the cab run at slower speeds for inspection. In car top station, there is an essential part: car top board.

When using the car top board, we need to pay attention to several parameters:

● The idea is that different elevators have different protocol parameters;

● Car top boards will be updated, and the versions and performance will be upgraded;

● During installation, pay attention to the wiring method of the terminals;

● Pay special attention to the working voltage of the board to prevent the circuit from being burned out.

Besides, elevator car top board also has close relation with the controller system: controller input the signal to car top board and then car top board input the signal to C.O.P. All parts work together tightly to move the elevator.

GPCS1116 is a car top board which is mainly used for BLT elevator. When selecting, we need to pay attention to the different meanings and protocols represented by different model suffixes, such as: GPCS1116-NUC-PCB-1.2, GPCS1116-M0-PCB-3, etc. The user should use the service tool to confirm the protocol and then select the most suitable one.

The elevator car top board is a critical component in the vertical transportation sector, serving as the control center located at the top of the elevator car. The car top plate is usually connected directly to the top or side surface of the car wall plate by fasteners, usually bolts. GPCR0074D001, which is mainly used for BLT elevator, is a car top board which is responsible for the transmission connection between the car top signal and the main board, with strong anti-interference and powerful functions. NONA ELEVATOR can get the product directly from the original factory with the unique value.