MITSUBISHI Parts
0102030405
elevator main board MITSUBISHI KCD-911A KCD-912B Machine roomless elevator parts
Mitsubishi KCD-911A board installation steps
1.Prepare the new motherboard：
Confirm the model: Make sure the purchased motherboard matches the device model.
Prepare tools: Screwdriver, electrical tape and other necessary tools.
2.Disconnect the power
Safe operation: Turn off the power switch and make sure the power is completely disconnected.
3.Remove the old motherboard
Record the connection: Note the location of all connecting wires.
Remove the screws: Use a screwdriver to remove the screws that fix the motherboard.
Remove the motherboard: Carefully remove the motherboard from the control box.
4.Install the new motherboard
Put the motherboard: Put the new motherboard into the control box and make sure the interfaces are aligned.
Fix the motherboard: Use a screwdriver to fix the motherboard.
Reconnect: Reconnect all cables according to the recorded positions.
5.Test the new motherboard
Restart the machine: Turn on the power switch.
Function check: Observe whether the device can start and run normally and check all functions.
Please follow the above steps for installation and ensure safety and caution during operation.
Send your enquiry with our high quality elevator main board MITSUBISHI KCD-911A KCD-912B Machine roomless elevator parts.