MITSUBISHI Parts
0102030405
Elevator Door machine Board Mitsubishi DOR-160B DOR-160D DOR-261A Elevator parts
| Control signal | The door machine board sends control signals to the door machine through the signal line. These signals include door opening signal, door closing signal, speed adjustment signal, etc. After receiving these signals, the door machine will perform corresponding actions according to the content of the signal. |
| Status feedback signal | The door machine will also send status feedback signals to the door machine board through the signal line. These signals include door position information, door movement status information, etc. The door machine board can monitor the operating status of the door machine in real time based on these feedback signals and make adjustments as needed. |
Mitsubishi door machine boards are usually composed of circuit boards, electronic components, interface connectors, etc. The circuit board is the basis of the door machine board, which is covered with various circuits and wiring; electronic components include microprocessors, drivers, sensors, etc., which are used to realize the control functions of the door machine board; interface connectors are used to connect the door machine board with other elevator components, such as door motors, door locks, etc.
The signal transmission between the door operator panel and the door operator is achieved through a series of electrical connections and signal lines.
The door operator board and the door machine are connected by electrical connections for signal transmission. These electrical connections usually include signal lines, power lines, grounding lines, etc., which transmit the control signals, power and grounding signals on the door operator board to the door machine. These electrical connections ensure that the door operator board can accurately control the movement of the door machine and monitor the operating status of the door machine.
The signal line is the key to realize the signal transmission between the door machine panel and the door machine. The signal line is usually arranged along the cable duct or cable tray of the elevator shaft to ensure the stable transmission of the signal. The signals transmitted on the signal line include control signals, status feedback signals, etc.
The signal transmission between the door machine board and the door machine is realized through electrical connections and signal lines. These connections and lines ensure that the door machine board can accurately control the movement of the door machine and monitor the operating status of the door machine in real time, thereby realizing the normal opening and closing and safe operation of the elevator door.
Guided speech：Send your enquiry with our high quality Elevator Door machine Board Mitsubishi DOR-160B DOR-160D DOR-261A Elevator parts .