elevator landing door device BST T2210-C2B elevator 2 panel center opening landing mechanism part

 BST Elevator Landing Door Device 2 Panel Center Opening Landing Mechanism T2210-C2B

The door system is mainly composed of floor doors (hall doors) and car doors, door machines, door locks, transmission mechanisms, protection systems and their associated parts. The floor door is located at the entrance to the landing station. The car is the door installed on the elevator car, that is, the door that passengers see after entering the elevator. When the elevator stops at the landing station, the car door is the active door and the floor door is the passive door. The door knife is embedded on both sides of the door lock roller. When the car door is opened, the door knife squeezes the roller to one side to open the floor door lock, and the car door drives the floor door to open or close. When the floor door and car door are completely closed, the elevator can operate normally.

BST Door System specialized in R&D, testing, manufacturing and sale for elevator door system, provide door system products and services in the worldwide. As a high and new technology enterprise, BST door system has various advanced technologies such as intelligent adaptive, closed-loop vector servo control, on-line identification and self calibration, electronic anti-vandal, etc, in accordance with the latest ROHS standards and the latest international elevator standards, with the CCC and CE certificate.

T2210-C2B landing door operator system has the following characteristic:

Comply with GB/T 7588-2020 and EN81-20/50 standards.

In line with the technological development trend of energy conservation and environmental protection, the European interface and the use of external door blades can seamlessly meet the needs of the European market.

The hall door device is easy to install and adjust, and uses a closing spring to meet the self-closing requirements, with good results.

The following is the specific parameter information: