How to use the escalator step cleaning machine

The use of escalator step cleaning machine usually includes the following steps.

1.Preparation

Inspect the equipment: Make sure that the roller brush, vacuum motor, dust bag, filter and other parts of the escalator step cleaning machine are in good condition and not damaged or worn.

Prepare the cleaning agent: If the cleaning machine needs to use cleaning agent, dilute the cleaning agent according to the proportion in the manual and pour it into the designated cleaning agent tank.

Safety preparation: Before starting the cleaning machine, make sure there are no pedestrians or obstacles around the escalator to avoid affecting the cleaning effect and causing safety hazards.

2.Operation process

1)Placing the equipment:

When the escalator is moving upward, place the cleaning machine on the escalator for cleaning.

When the escalator is moving downward, place the cleaning machine under the escalator for cleaning.

2)Starting the equipment:

Push the roller brush and suction scraper of the cleaning machine onto the escalator plane to ensure that the equipment is placed stably.

Start the vacuum and roller brush switches to start the cleaning operation.

3)Adjust the cleaning parameters:

According to the cleaning needs, adjust the parameters of the cleaning machine such as the cleaning intensity and spray time.

4)Monitor the cleaning process:

During the cleaning process, pay attention to the operating status and cleaning effect of the cleaning machine.

If any abnormality is found, the machine should be stopped immediately for inspection and troubleshooting.

3.Finishing Work

1)Turn off the equipment:

After cleaning, turn off the power of the cleaning machine to ensure that the equipment stops running completely.

2)Clean the equipment:

Clean the dirt in the dust bag and the entanglement on the roller brush to avoid affecting the next use.

If detergent is used, the detergent tank and pipes should be cleaned to prevent clogging by residues.

3)Maintain the equipment:

Regularly check the wear of the roller brush, vacuum motor, filter and other parts of the cleaning machine, and replace damaged parts in time.

Perform comprehensive cleaning and maintenance on the equipment to ensure that the equipment is in good condition.

4.Precautions

1)Safety first: During operation, safety operating procedures should always be followed to ensure the safety of personnel and equipment.

2)Power-off inspection: When inspecting or repairing the cleaning machine, be sure to disconnect the power cord and keep it in a power-off state.

3)Reasonable use: Avoid continuous use of the cleaning machine for a long time to avoid damage to the equipment or affect the cleaning effect.

4)Record maintenance: After each use, the use and maintenance of the cleaning machine should be recorded to detect and solve problems in a timely manner.