Elevator Main Board Mitsubishi P203718B000G01 P203718B000G02 P203718B000G03 Elevator PCB
|
Name |
Model |
Miterial |
Chip |
|
Elevator board |
P203718B000G01 P203718B000G02 P203718B000G03 |
Plastic |
ZS72A8C031 |
Mitsubishi P203718B000G01 motherboard parameter editing steps:
Enter parameter setting mode:
Enter through panel key combination or specific operation steps.
Parameter adjustment:
Press the SET key to enter the parameter change state.
Use the up/down keys to increase/decrease the parameter digit or setting value.
Parameter writing:
Press the SET key for 1.5 seconds to write the setting value. The screen flashes to indicate that the setting is successful.
Precautions:
Make sure the inverter is not running, otherwise the parameters cannot be modified.
Some parameters may be protected and require a password to enter the modification.
Please read the manual in detail before modifying to understand the meaning and setting range of each parameter.
Through the above steps, you can edit and adjust the parameters of the Mitsubishi P203718B000G01 motherboard. Please be careful to avoid affecting the normal operation of the equipment.
Mitsubishi P203718B000G01 motherboard parameter saving method:
Editing completed: Make sure all parameters to be modified have been adjusted.
Save operation:
Usually, after the parameter setting is completed, you need to press a specific key (such as the SET key) to save.
According to the screen prompts, confirm and write the set value. The screen may flash to indicate successful saving.
Notes:
Before saving parameters, make sure the device is not running to avoid parameter writing failure or device abnormality.
Some parameters may be protected and need to enter the correct password before saving.
Backup suggestions:
To prevent parameter loss or restore default settings, it is recommended to back up parameter configurations regularly.
You can consider backing up the parameter configuration file to a USB flash drive or other storage device for quick recovery when needed.
Please follow the above steps to save the parameters and ensure that the operation is correct to avoid affecting the normal operation of the device.
Send your enquiry with our high quality Elevator Main Board Mitsubishi P203718B000G01 P203718B000G02 P203718B000G03 Elevator PCB .