elevator LWB board OTIS GAA26800KJ1 GBA26800KJ1 elevator Weighing plate
DESCRIPTION
|
NO |
Type |
Weight |
Application |
Material |
|
1 |
Elevator board |
1KG |
Elevator parts |
Copper Foil |
Otis GBA26800KJ board usage guide
1. Preparation phase:
Make sure the elevator is in a safe state, cut off the power, and prepare the required tools and the new GBA26800KJ board.
2. Remove the old board:
According to the elevator maintenance manual or professional guidance, find and remove the old GBA26800KJ board. Pay attention to mark and record the location of all connecting wires and fixings for subsequent installation.
3. Install the new board:
Place the new GBA26800KJ board in the predetermined position, connect all power and control wires according to the previously recorded positions, and install it firmly with appropriate fixings.
4. Testing and debugging:
After the installation is completed, reconnect the power and perform functional tests to ensure that the new board works properly. Make necessary adjustments and optimizations as needed.
Understand the basic information: This board is suitable for DC elevators and adopts button control.
5. Server connection and self-test:
Insert the server into the interface of the Otis elevator board.
Observe the ST display, which should display "SELF TEST –OK, MECS-MODE", indicating that the self-test has passed and the current mode is modular elevator control system.
During use, follow the elevator operating specifications and safety guidelines.
If you encounter any problems, refer to the official manual of Otis Elevator or contact professional technicians.