MITSUBISHI Parts
0102030405
elevator GPS-3 main board MITSUBISHI KCD-701C KCD-702C KCD-703C KCD-704C KCD-705C elevator parts
The specific parameters of Mitsubishi KCD-701C board are as follows:
Main chip:
Main control CPU: AM386.
RAM: Four chips, 256K each, 1M in total.
FLASH flash memory: Two chips, 4M each, 8M in total.
Other: Including dual ROM, dedicated large-scale integrated circuits, etc.
Modifiable parameters:
Parameters such as elevator floor display, base station, forced door closing, fire protection function, door opening and closing time can be modified, such as changing the B1 floor display to -1, etc.
Power supply:
DC 24V, two-phase AC 220v, (-10%, +15%), 50HZ .
Environmental conditions:
The ambient temperature is 0℃-55℃, prevent direct sunlight; the relative humidity of the air should be less than 85% (no condensation). Stay away from strong vibration sources and prevent frequent or continuous vibrations with a vibration frequency of 10-55HZ. Avoid corrosive and flammable gases .
Common Problems with Mitsubishi KCD-701C Board
Communication Problems: May include unstable communication, failure to connect, or communication interruption. This may be related to the communication protocol, interface settings, or physical connection.
Hardware Failure: The board may have hardware damage, such as component failure, circuit short circuit or open circuit. Such problems usually require professional inspection or replacement.
Software Compatibility Issues: The KCD-701C board may be incompatible with certain software versions, resulting in failure to work properly. It is important to ensure that you use a software version that is compatible with the board.
Parameter Setting Error: Incorrect parameter settings may cause the board to not work as expected. Checking and correctly setting the parameters is the key to solving the problem.
Send your enquiry with our high quality elevator GPS-3 main board MITSUBISHI KCD-701C KCD-702C KCD-703C KCD-704C KCD-705C elevator parts.