MITSUBISHI Parts
0102030405
elevator drive board MITSUBISHI KCR-910A KCR-910B KCR-910C elevator pcb parts
Mitsubishi KCR-910A board replacement and maintenance guide
Preparation phase
Tool preparation: Make sure you have the appropriate tools and anti-static devices.
Contact relevant personnel: Notify the dispatcher and operator, and hang up the maintenance board.
Equipment disassembly
Shutdown monitoring: When shutting down for maintenance, more than two people are required to monitor the operation.
Power-off operation: Turn off the main power supply and other power supplies, and turn the CPU mode selection switch to the "stop" position.
Disassembly sequence: Record the line number and connection position, and remove the power supply rack, CPU main board, and input and output board in sequence.
Cleaning and inspection
Cleaning the board: Clean the removed parts and reinstall them on the spot.
Check the connection: Check and tighten the connection of the terminal block in the PLC cabinet.
Replace the filter: Regularly replace the filter under the power supply rack.
Reinstall and test
Careful installation: Pay attention to anti-static, and transport and install each component carefully.
Restore connection: After restoring all connections, turn on the power and start the PLC host.
Test function: Test whether the board functions normally.
Common faults of Mitsubishi KCR-910A board mainly include the following:
Overload fault: It is caused by the load exceeding the rated range of the motor or improper equipment adjustment. It is necessary to check the load, motor temperature and current.
Overspeed problem: It is usually related to improper parameter setting of the control system. It is necessary to check the PID parameters, calibrate the encoder and check the control instructions.
Wiring problem: Poor motor wiring or encoder wiring may cause failure. It should be confirmed whether the wiring is firm and reliable.
Send your enquiry with our high quality elevator drive board MITSUBISHI KCR-910A KCR-910B KCR-910C elevator pcb parts.