Elevator debugging board kone KM713130G01 elevator LCEKNX board pcb

Kone KM713130G01 is one of the spare parts of Kone elevators. It is a decoder board/circuit board for KONE elevator systems. As a component of KONE elevator system, KM713130G01 circuit board works with other KONE elevator circuit boards (such as A1, A2, A3, etc.) to ensure the normal operation of the elevator.

Physical specifications

Dimensions: 18cm long, 7.5cm wide, 3.5cm high.

Weight: Net weight 445g.

Electrical characteristics

Working voltage: Usually the working voltage is about 24V DC, allowing a certain voltage fluctuation range, generally between 20V and 30V can work normally.

Communication interface

KNX interface: Supports KNX communication protocol, used to communicate with other KNX devices in the elevator control system to realize signal transmission and interaction, such as communication with car controllers, elevator call controllers and other devices.

Other interfaces: There may be some other types of interfaces, such as interfaces for connecting sensors, actuators or other auxiliary devices. The specific interface types and quantities will vary depending on the elevator configuration.

Functional characteristics

Single unit unlocking function: It can be used for the unlocking operation of a single elevator to achieve specific control and operation of the elevator.

Signal conversion and processing: It can convert and process various signals in the elevator control system, such as converting the call signal and door status signal in the car into signals that can be transmitted in the KNX network, and decode and process the received signals to control the operation of the elevator and the opening and closing of the door.

Fault diagnosis and alarm: It has certain fault diagnosis functions. When the device or the equipment connected to it fails, it can send an alarm message to the maintenance personnel through a specific signal or indicator light, which is convenient for quick positioning and troubleshooting.

Environmental adaptability

Working temperature: Generally, it can work normally in the ambient temperature range of -10℃ to 50℃. Some special models of protocol boards may have a wider working temperature range.

Humidity range: It can work normally in the relative humidity between 5% and 95% without condensation.

Protection level: It usually has a certain dustproof and waterproof level to adapt to the harsh working environment such as elevator room or shaft. The general protection level can reach IP20 or higher.

Working temperature: It can generally work normally in the ambient temperature range of - 10℃ to 50℃. The working temperature range of some special models of protocol boards may be wider.

Protection level: Usually has a certain level of dust and water resistance to adapt to harsh working environments such as elevator machine rooms or shafts. The general protection level can reach IP20 or higher.