Elevator Car top communication PCB Board Step SM.02DP A Elevator Parts

The SM.02DP A elevator board of STEP is an expansion board of the elevator car command board, which is usually used in the STEP elevator system. The main functions of this board include collecting the switch quantity signals of the car part, such as the door opening position, the door closing position, the safety touch panel, the overload, the full load, the driver, the independent and other signals, and transmitting them to the main controller through the CAN bus. At the same time, it can also control the outputs of the upper and lower arrival clocks, lighting relays, overload lights, buzzers, voice announcements, etc. according to the signals transmitted by the main controller through the CAN bus.

Main functions

Signal acquisition: Collect the switch quantity signals of the car part, such as the door opening position, the door closing position, the safety touch panel, the overload, the full load, the driver, the independent and other signals.

Signal transmission: Transmit the collected signals to the main controller through the CAN bus.

Control output: Control the upper and lower arrival clocks, lighting relays, overload lights, buzzers, voice announcements, etc. according to the signals of the main controller.

Technical parameters

It has three-way CAN bus communication.

It can match asynchronous and synchronous PG cards.

It has parallel and group control functions.

It has real-time clock function.

One RS232 communication port can be connected to a handheld operator.

Common problems and solutions

When using the SM.02DP A , you may encounter some problems, such as when the elevator self-learning operation stops, the upper single-layer strong and slow switch does not work, or is not in the door area (no leveling switch works); the number of leveling plug-ins is inconsistent with the number of floors set by the parameters; the position of the detected terminal switch action point is unreasonable, etc. The solutions to these problems usually require professional elevator maintenance personnel to debug and maintain.

Maintenance and care

In order to ensure the normal operation of the elevator, it is recommended to regularly inspect and maintain the elevator board SM.02DP A, including checking whether the connection of the board is loose, whether there are signs of damage, and whether software updates are required. At the same time, other parts of the elevator also need to be regularly inspected and maintained to ensure the safe operation of the entire elevator system.

 Send your enquiry with our high quality Elevator Car top communication PCB Board Step SM.02DP A Elevator Parts .