Elevator Products
-
Elevator Products
- Elevator Brand
-
Elevator Category
- Elevator ARD
- Elevator Car Lighting Equipment
- Elevator Light Curtain/Door Sensor
- Elevator Car Fan/Conditioner
- Elevator Inspection Box
- Elevator Guide Shoe
- Elevator Safety Parts
- Elevator Encoder
- Elevator Wire Rope/Cable
- Elevator Door Operator
- Elevator Contact/Relay
- Elevator Resistor
- Elevator Module
- Elevator Pulley/Sheave/Wheel
- Elevator Test Tool
- Elevator Door Parts
- Elevator PCB
- Elevator Controller/Inverter/Drive
- Elevator Traction Machine
- Elevator Modernization
- Parts Catalog
- Escalator Products
- Whole Elevator
0102030405
elevator leveling sensor MITSUBISHI CEDES GLS 126.NT2.MV.NO elevator optoelectronic switch
|
Name |
Model |
Miterial |
VOL |
Current |
Res time |
|
Leveing sensor |
GLS 126.NT2.MV.NO |
Plastic |
12--60VDC |
200mA |
＜1ms |
Mitsubishi GLS 126.NT2.MV.NO photoelectric switch has the following functions:
1. Object detection:
It can detect the existence or passage of an object. When the object enters the beam range, it will block the light emitted by the transmitter, thereby triggering a signal to inform the control system of the existence of the object.
2. Precise positioning:
The repeatability is as high as 0.5mm, which is suitable for occasions requiring precise positioning, such as elevator precise positioning, tool wear detection, etc.
3. Strong environmental adaptability:
It is not sensitive to the interference of smoke, dust and water vapor, and can be used in extreme conditions of dust, fog and smoke.
4. Control load:
The direct control load of the amplifier and relay can reach up to 200mA, meeting a variety of control needs2.
5. Multiple output forms:
Support push-pull output PNP or NPN output form, which is convenient for connection with different control systems.
Interface type of Mitsubishi GLS 126.NT2.MV.NO photoelectric switch:
This photoelectric switch supports universal output (NPN or PNP) interface type 1. This means that it can be configured as NPN output or PNP output as needed to meet different control system requirements. This flexible interface design makes the photoelectric switch widely compatible with various PLCs (programmable logic controllers) and other automation equipment.
The maximum detection distance of this photoelectric switch varies depending on the type:
Through-beam photoelectric switch: The maximum detection distance can usually reach 0.1m to 15m, and some models can even reach a longer distance, such as 30m.
Diffuse reflection photoelectric switch: The maximum detection distance is generally between 5cm and 1m.
Feedback reflection photoelectric switch: The detection distance is between diffuse reflection and through-beam types, usually between 0.1m and 5m.
It should be noted that the actual detection distance will also be affected by many factors, including the material, color, surface state of the object being measured, and ambient light conditions.
Therefore, when selecting and using photoelectric switches, you should make comprehensive considerations based on the specific application scenarios and needs, and refer to the product manual or consult professionals to obtain accurate detection distance information.
Send your enquiry with our high quality elevator leveling sensor MITSUBISHI CEDES GLS 126.NT2.MV.NO elevator optoelectronic switch .