Elevator Contact/Relay
-
Elevator Products
- Elevator Brand
-
Elevator Category
- Elevator ARD
- Elevator Car Lighting Equipment
- Elevator Light Curtain/Door Sensor
- Elevator Car Fan/Conditioner
- Elevator Inspection Box
- Elevator Guide Shoe
- Elevator Safety Parts
- Elevator Encoder
- Elevator Wire Rope/Cable
- Elevator Door Operator
- Elevator Contact/Relay
- Elevator Resistor
- Elevator Module
- Elevator Pulley/Sheave/Wheel
- Elevator Test Tool
- Elevator Door Parts
- Elevator PCB
- Elevator Controller/Inverter/Drive
- Elevator Traction Machine
- Elevator Modernization
- Parts Catalog
- Escalator Products
- Whole Elevator
01
Elevator contactor Schneider CAD32BDC CAD50F7C CAD32F7C CAD32M7C CAD50M7C
DESCRIPTION
The Schneider Elevator contactor is equipped with imported flame retardant housing, high purity copper coil, silver alloy touchpoint and 32 high quality iron cores.
The coil surge suppression module card is attached to the top of the control relay, and the circuit connection can be connected instantly. In addition, input modules can also be assembled.
The RC circuit effectively protects circuits that are more sensitive to "high-frequency" interference, with an upper voltage limit of 3Uc and an upper oscillation frequency limit of 400HZ, and increased disconnection time (1.2 and 2 times normal).
specification
|
Model |
coil voltage |
Touchpoint form |
|
|
CAD32FDC |
DC110V |
3 open 2 close 10A |
|
|
CAD32BDC |
DC24V |
||
|
CAD32MDC |
DC220V |
||
|
CAD50FDC |
DC110V |
5 Normally Open 10A |
|
|
CAD50BDC |
DC24V |
||
|
CAD50MDC |
DC220V |
||
|
standard |
IEC947-5-1, GB140485 |
Rated voltage (Uimp) |
6 kV |
|
Electrical isolation |
Up to 400V reinforced insulation |
protective measures |
"TH" |
|
Protection class |
IP2X |
impact resistance |
Control relay open 10gn |
|
Working altitude limit |
3000 m |
Half sine wave, 1lms |
Control relay closure 15gn |
|
certificate |
CCC, CE |
earthquake resistant |
Control relay open 2gn |
|
Rated insulation voltage (Ui) |
690 V |
5... 300Hz |
Control relay closure 4gn |